Here is Automotive Terminals Stamping Die Manufacturer talking about How to better choose a fully automatic punching machine.
If you have any idea about Altimeter Stamping Products, welcome to contact us and discuss.
In daily life, the automatic punching machine should be regularly maintained. The maintenance frequency varies from maintenance to maintenance. For example, mold position inspection, flywheel conveyor inspection, mold table cleaning, and other maintenance are frequent. The scientific maintenance can make the service life of automatic punching equipment. Longer, and a long-term guarantee of the quality of punching.
The first lubrication refueling (reducing the friction of each part) automatic CNC punching machine needs to increase the lubricating oil for each lubrication point every 1-3 months. When refueling, it is necessary to use the oil filling gun, and add it to the corresponding part according to the rules; Pay attention to dust prevention, because if the lack of lubricating oil will increase the mechanical friction and reduce the life of each part, it may increase the noise and cause noise pollution.
The second tightening drive belt (avoiding sagging or causing danger) is also an indispensable maintenance item for the CNC punching machine. After the protective cover is opened, it is observed by the naked eye whether it is loose or not, to see if it is drooping; If this is the case, the drive belt should be tightened, but Xiao Bian reminds you that when checking the V-belt, it must be done in the stop state, otherwise it will endanger personal safety. The above is the maintenance method of the automatic CNC punching machine.
Third mold fixing screw fastening In addition to the most common maintenance items, it is necessary to tighten the automatic CNC punching machine mold and screws, that is, use a hex wrench to determine the mold screw to reach a fixed position; if it is loose for a long time It can jeopardize the safety of punching or reduce the quality of punching or increase the aperture error.